MasterSeal FR 470 (Masterflex 700 FR PG)
MasterSeal GG 470 is a high grade, polysulphide based sealant possessing outstanding resistance to deterioration due to weathering, ozone, ultraviolet light and attack by chemicals present in industrial atmospheres. It has the ability to withstand repeated cycles of compression and extension over a wide temperature range, and has excellent adhesion properties to all materials commonly employed in building and construction work.
MasterSeal GG 470 is supplied in 2 packs, a total of 3 litre sealed units for sealing horizontal and vertical joints where pronounced cyclical movement is expected and where the service conditions would be harsh for most common sealants. It is ideal for use in expansion joints in reinforced concrete structures such as bridges, reservoirs, water treatment works, sea walls and roads, etc. It can also be used in floor joints subject to heavy usage where a high resistance to damage is required.
Concrete & Masonry: Surfaces must be clean and dry. Wire brush thoroughly and remove dust and all contaminants.
Metals: Remove any corrosion or millscale by grit or shotblast, wirebrush, grinder or chemical remover. De-grease the surfaces with clean cloths soaked in oilfree cleansing solvent.
Wood (bare): Wood surfaces must be clean and dry, cut back or abrade where necessary to sound timber. Glass and glazed materials: Thoroughly clean the surfaces with clean cloths soaked in oilfree cleansing solvent.
Coating surfaces: Coating should be removed and the surfaces treated as above.